The production of riveted shelving follows a chain of "material preparation-profile processing-surface treatment-assembly inspection-packaging and shipping," balancing structural strength, assembly efficiency, and appearance quality. It is suitable for light-load storage and display scenarios where manual access is primary. Its typical structure includes uprights, beams (or hooks), shelves, and fasteners, and is quickly assembled using riveting or snap-fit connections.
I. Material and Process Preparation
• Base Material Selection: Uprights commonly use 30×30×1.2–1.8 mm equilateral angle steel or 35×35×1.2 mm angle steel; shelves use cold-rolled steel plates, with reinforcing ribs welded according to load-bearing requirements; fasteners and hooks use suitable rivets, pins, and triangular fixing pieces. The above specifications and material combinations cover most light-load applications, balancing economy and forming quality.
• Tooling and Fixtures: Prepare leveling machines, automatic rolling mills, punch presses (including positioning fixtures), CNC/bending machines, spot welding/argon arc welding equipment, pretreatment tanks, electrostatic spraying lines, and drying ovens, ensuring consistency in critical dimensions and surface treatment.
II. Processing and Manufacturing of Columns and Shelves
• Column Processing
• Leveling and Rolling: After leveling to remove internal stress, the strip steel enters the automatic rolling mill to form angle steel profiles of the target cross-section specifications.
• Punching and Cutting: Double-sided punching is performed according to the designed hole spacing, with a common pitch of 50 mm. The holes are used for hanging shelves or beams; cutting is done to the order height to ensure consistency in length tolerance and hole position.
• Shelf Processing
• Blanking and Bending: After longitudinal shearing and leveling, cold-rolled steel sheets are bent into shape on all four sides according to specifications to form load-bearing frames and flat support surfaces.
• Strengthening Process: Depending on the load-bearing capacity, weld transverse or longitudinal reinforcing ribs to improve bending stiffness and localized load-bearing capacity, preventing deflection and denting under long-term use.
III. Surface Treatment and Protection
• Pre-treatment Process: Grinding/degreasing-pickling-phosphating are performed sequentially to remove oxide scale and rust sources, improving coating adhesion and corrosion resistance.
• Coating Process: Electrostatic powder coating is used to achieve uniform and dense coating coverage; subsequent drying and curing form a stable protective layer and surface finish.
• Quality Key Points: Control the phosphating film weight and coating thickness to ensure corrosion resistance and abrasion resistance meet storage environment requirements; the finished surface should be smooth, free of runs and pinholes, with consistent color and gloss.
IV. Assembly, Inspection, and Packaging
• Assembly Method
• Typical structure is snap-fit: Column holes mate with beams/hangers, and shelves are locked in place by quick-release pins and triangular fixing pieces; some models use single/double rivet beam structures to improve load-bearing capacity or shelf stability, meeting different density and strength requirements. • Plastic feet are installed at the bottom for leveling and shock absorption, improving overall stability and protecting the floor.
• Dimensional and Functional Inspection
• Check the verticality of the columns, the flatness of the shelves, the clearance of the holes, and the tightness of the assembly; conduct load-bearing verification on samples to ensure that the design specifications are met (commonly ≤150–180 kg/layer for light loads).
• Packaging and Shipping
• Use corner protectors, protective panels, and stretch film for scratch and moisture protection; reinforce and bundle easily deformable parts and set up interlayer isolation to ensure safety and integrity during transportation and storage.






