Large-span storage racks, due to their large lateral coverage and dense storage locations, improve space utilization but also place higher demands on operating procedures and technical specifications. Scientific and rigorous operating methods are not only a prerequisite for ensuring operational safety but also help maintain the long-term stability of the racking and the efficiency of system operation.
First, in the preparation phase, clear operating procedures should be developed based on the weight, size, and access frequency of the stored goods. Operators must be familiar with the racking design parameters, including maximum span load capacity, layer height limits, and permitted types of handling equipment. Overloading or stacking goods on non-designated layers is strictly prohibited. Before operation, a routine visual inspection of the racking structure should be conducted, focusing on checking for looseness, deformation, or visible damage at the connections between beams and uprights. Ensure the ground is level and free of obstructions to prevent accidental impacts during equipment movement or turning.
Goods storage and retrieval should follow the principle of "even load distribution, avoiding unbalanced loads." When placing pallets or unitized goods, ensure the load center coincides with the rack's designed load-bearing center to prevent excessive beam deflection or node imbalance caused by eccentric loading. For large-span beams, distribute the load positions evenly along the length to reduce concentrated loads in the middle of the span. Retrieve goods systematically from far to near and from top to bottom to avoid sudden changes in local load caused by removing multiple pallets at once, which could affect structural stability.
The use of handling equipment must be compatible with the rack span and aisle width. Forklifts or stackers should slow down before entering the racking area and maintain a sufficient radius when turning to prevent collisions with uprights or beams. If the rack height is large, control the lifting and lowering speed to reduce the impact of dynamic loads on the structure. In scenarios where automated storage and retrieval systems are linked to the racking, ensure the equipment's operating trajectory matches the rack's pre-reserved safety clearance and regularly check positioning accuracy to prevent mechanical interference due to accumulated errors.
A procedure for handling abnormal situations should be established in daily operations. If abnormal rack noises, obvious deformation, or loose connections are observed, stop work immediately and notify professional personnel for assessment. By strictly implementing the above operating methods, the advantages of large-span warehouse racking space can be fully utilized while effectively preventing safety risks and extending the service life of the facilities.






